Anti-Slip Epoxy

R10-R13 slip-rated epoxy systems for commercial kitchens, hospital wet zones, hotel pool surrounds — occupant safety non-negotiable.

What is Anti-Slip Epoxy?

Anti-slip epoxy is a performance-grade flooring system engineered to deliver measurable slip resistance across wet, chemically active, and high-traffic surfaces. Unlike standard epoxy coatings, anti-slip systems incorporate aggregate broadcasts — aluminium oxide, quartz sand, or carbide granules — bonded within a high-build resin matrix to achieve R10 through R13 pendulum-tested slip ratings under DIN 51130 and AS 4586 classification protocols. The result is a surface that maintains coefficient-of-friction thresholds even when saturated with water, cooking oils, cleaning agents, or poolside chlorinated splash.

Facilities managers, HSE officers, and principal architects specify anti-slip epoxy wherever occupant safety intersects with institutional accountability. A slip event in a hospital wet zone or a commercial kitchen carries significant liability — the flooring specification is the first line of structural defence.

When to Specify Anti-Slip Epoxy

Any facility that combines foot traffic with routine moisture or chemical exposure demands an anti-slip specification. Commercial kitchens in hotels, hospitals, and institutional catering facilities operate continuously across wet conditions; a smooth-surface epoxy in these environments is a compliance failure, not a finish choice. Hospital wet rooms, ablution blocks, and hydrotherapy suites require R12-rated surfaces that perform under clinical cleaning regimes without delamination or loss of aggregate.

Beyond food service and healthcare, hotel pool surrounds, changing rooms, industrial process corridors, and cold-store facilities form the core specification base. Pharmaceutical manufacturing areas — where spills may include reactive compounds — frequently specify R13 anti-slip systems combined with chemical-resistant resin chemistry. Any project where the occupant safety case demands documented, testable slip resistance is a project that warrants an anti-slip epoxy specification.

Methodology — The Epoxy GH Specialist Approach

Specification & Risk Assessment. Our specialists review the facility’s HSE requirements, occupancy patterns, and expected contaminants. Slip-rating target (R10, R11, R12, or R13) is confirmed against the use-case and any insurance or regulatory obligations before a single material is ordered.
Site Survey & Substrate Evaluation. Concrete pull-off strength, surface moisture content, and existing coating condition are tested on-site. Substrates below 1.5 N/mm² tensile strength or above 75% RH receive remediation before the specification proceeds.
Surface Preparation. Diamond-head shot blasting or scarification opens the concrete profile to ICRI CSP 3-5, ensuring mechanical keying for the primer coat. All contamination — grease, laitance, curing compounds — is removed to bare structural substrate.
System Application. Primer, mid-coat, and broadcast aggregate layers are applied to timed schedules controlled for ambient temperature and relative humidity. Aggregate broadcast weight and density are calibrated to the target slip-rating, then sealed with a topcoat resin that locks the profile without bridging aggregate peaks.
Quality Sign-Off & Documentation. Pendulum slip tests or ramp tests are conducted on the cured surface. Results are logged against the specified DIN or AS classification and issued to the client as a compliance record. Cure inhibition and traffic-readiness are confirmed before the facility reopens.

Materials & Standards

Aggregate types: Aluminium oxide (white fused), silicon carbide, quartz sand — graded to slip-rating target
Resin systems: Solvent-free high-build epoxy; optional polyurethane topcoat for enhanced chemical resistance
Slip classification: DIN 51130 (R10–R13 ramp rating); AS 4586 pendulum classification
Thickness range: 2 mm–6 mm system build depending on substrate condition and duty cycle
Chemical resistance: MEK double-rub tested; suitable for HACCP-compliant food environments
Primer standards: Two-component moisture-tolerant epoxy primer; pull-off adhesion ≥ 1.5 N/mm²

Outcomes & Guarantees

A correctly specified and installed anti-slip epoxy system delivers a surface that is testably safe, institutionally documented, and built to outlast the cleaning and operational cycles of demanding facilities. Epoxy GH issues tiered performance coverage: a 5-year Local Performance Warranty covering adhesion and aggregate retention under standard conditions; a 7-year ISO-Aligned Warranty for systems installed to full DIN/AS classification protocol; and a 10-year Industrial Duty Warranty for R12-R13 systems in pharmaceutical, cold-store, and heavy-duty process environments.

Anti-slip epoxy intersects directly with broader flooring specifications across healthcare, hospitality, and industrial sectors. Clients commissioning anti-slip systems frequently extend specifications to include Chemical-Resistant Epoxy for adjacent process areas, Self-Levelling Epoxy for dry traffic corridors, and Epoxy Screed for heavy-load floor build-up where substrate remediation is required.